33
-EN
• When the “Scroll Setting” (page 30) is set to “AUTO,” the display
scrolls continuously.
When the Scroll Setting is set to “MANUAL,” the display scrolls
only once after any function is performed (PRESET, BAND,
SEARCH, etc.).
Press and hold
TITLE
for more than 2 seconds to scroll the
display manually.
• “Channel Number” and “Clock” displays do not scroll.
• Depending on the model, the display may differ from the one
shown above.
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or
off.
1
Press
MENU
.
2
Select SETUP by sliding your finger on the
GlideTouch bar
to the left or right. Press the
GlideTouch bar
under SETUP.
The main SETUP menu is displayed.
3
Select TUNER by sliding your finger on the
GlideTouch bar
to the left or right. Press the
GlideTouch bar
under TUNER.
The TUNER SETUP menu is displayed.
4
Select XM ADF by sliding your finger on the
GlideTouch bar
to the left or right. Press the
GlideTouch bar
under XM ADF.
5
Press the
GlideTouch bar
under ON or OFF in the
Function Guide display.
6
Press and hold
MENU
for at least 2 seconds to
return to the normal mode.
• If
MENU
is pressed while adjusting or setting the itmes in the
MENU mode, the unit will return to the previous selection secreen.
• By pressing the
GlideTouch bar
under RETURN in the MENU
mode, the unit will return to the normal mode.
