Alpine Saunas Outdoor Barrel Sauna, Руководство по установке

Страница: 7 / 19

4. Lay the ‘Front Panel Parts 1, 2 & 3’ flat on the ground with non -oiled side right
side up.
Before securing the front panels together, consideration must be made for the
wiring of the Lamp / Sauna light. The included lamp does not come with wiring or a
switch, these must be provided and installed via an electrician. A wire channel is
provided in the
‘Front Panel Part 3’ as shown below.
Front Panel Part 1
Left side Panel
(Half crescent with no vents or holes.)
Front Panel Part 2
Middle Glass Door
Front Panel Part 3
Right Side Panel
(Half crescent with vent hole at bottom,
serial plate at top)
Using a pencil,
mark the bottom
of the’ Front
Panel Part 3’
(within the red
circle shown) as
to where the
channel sits. This
info will be used
to line up a
drilling spot on
the stave below.