Alpine Saunas HY-YM6008, Инструкция по установке и эксплуатации

Страница: 21 / 26

21
1. Powering on/off
Plug the main power cord into the wall outlet.
Press the “Power” button once.
The control panel should beep and is now in standby mode, but the
heaters are not on by default.
To turn the sauna off, hold the power button down for 5 seconds.
2. Turning on the Heaters
Press “Power” button again.
The “Heating” light will turn on, which indicates the heaters are active.
The default heat temperature is set to max (70°C).
3. Setting Session Time
Sauna session timer can be set between 0 to 90 minutes.
Press the time “UP/DOWN ARROWS” to enter the time adjustment
mode and allow you to set the session time. Time value will increase or
decrease by 1 minute at a time (hold down the buttons to speed up the
increments).
5 seconds without adjustment will exit the time adjustment mode.
Once set, the time display will show the remaining minutes until
the session ends and the heaters are disabled.