- 2 -
ENGLISH
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occur, refer to an authorized service center only.
8. Never pull the appliance by power cord.
9. Do not use the appliance for other than intended household use.
Parts Description
1. Switch
2. Back cover
3. Reflect base
4. Front net
5. Heating element
6. Front cover
7. Base
Save these instruction:
1. Place the unit on clean and level surface, check the tube heating element before use.
2. Insert the plug into corresponding wall socket.
3. Power adjustment: turn the switch to I, the power is 400w, turn the switch to II, the power is 800w and
turn the switch to O, it is power Off.
4. When unit is used at high temperature, make sure there is nothing flammable or easy deform object
within 1 meter in front of the unit and about 0.5 meter at the back of the unit, do not place in wet
surface.
5. The power cord should be place at the back of body frame. If not, this cord may lead to over head of
power cord.
6. During operation especially at the beginning and end of use, sounds may occur. This is due to the
expansion and contraction sound of heated object. This is quite normal and does not mean of
malfunction.
7. Do not use the unit when sleeping or leave it unattended for long time, if using make sure the unit is
place far away with the articles such as textile, bedding etc. to avoid accident.
8. Never touch the protector on front of the unit during operation to avoid burn.
9. Do not use this heater in moist places or in bath, shower or a swimming pool.
10. Do not use this heater with a thermal control or program controller in which timer or any other device
switches the heater automatically.
11. Do not cover the appliance during operation to avoid fire risk.