User’s Manual of Remote Controller
1).
Adjust set temperature to 30
℃
;
2).
With
in 5 seconds, press ▼ button and then press ▲ button repeatedly for
three times;
After finishing setting, “UC” is displayed on receiver light board for 5 seconds
and “MASTER” icon is displayed on wired controller.
(5).
Switching temperature scale
In unit off st
atus, press MODE button and ▼ button simultaneously to switch
temperature scale between
℃
and
℉
.
4 Basic operation instructions
(1).
When the main unit is energized, press ON/OFF button on the remote
controller to turn on the unit.
(2).
Press MODE button to select the desired operation mode.
(3).
Press ▲ or ▼ button to set the desired temperature (temperature setting is
not needed in auto mode).
(4).
Press FAN button to set fan speed in auto, low, medium and high speed.
5 Replacing batteries in remote controller and notes
(1).
Slightly press the place with OPEN, and then push out the back cover of
remote controller along the direction of arrow (as shown in Fig 3
①
).
(2).
Take out the original batteries (as shown in Fig 3
②
).
(3).
Place two 7# (AAA 1.5V) dry batteries, and make sure the position of
＋
polar
and
－
polar is correct (as shown in Fig 4
③
).
(4).
Reinstall the cover (as shown in Fig 4
④
)
Fig.3 Fig.4
Notes:
①
.
When replacing the batteries, do not use old or different types of batteries,
otherwise, it may cause malfunction.
②
.
When you won’t use the remote controller for a long time, please take out the
Содержание YV1L1
Страница 12: ......