User’s Manual of AWCL-300-6P-Series
Copyright
©
2008 By Taiwanese
PAGE 7
V1.0 – Dec. 02, 2009
: System Power switch. When System power is off, then there is some current existed
。
(<20mA)
: Pause the program when the P1 ~ P6 play
。
Toggle pause and play
。
: Switch the Jump/Fade mode when P1 ~ P6 play
。
Toggle Jump and Fade
。
: Adjust the Jump/Fade speed of P1 ~ P6
。
There are 24 various speed option
。
: Adjust the Brightness of LED
。
There are 16 various brightness option
。
Hint : If you had adjusted the LED
brightness individually, then is maybe not 16 various brightness option anymore
；
Beside, it can be used to adjust
the sensitivity of Audio under the audio Synchronized mode. Decreasing the brightness means to decrease the
sensitivity (16 various sensitivity)
。
But, this setting will be not auto-saved, if you want to fix the specific sensitivity,
using the adjustment VR of Sensitivity to do.
: Set the LED color as 100 % Brightness RED
。
: Set the LED color as 100 % Brightness Green
。
: Set the LED color as 100 % Brightness Blue
。
: Set the LED color as Orange then 100 % Brightness RED and 50 % Brightness Green
。
: Set the LED color as Yellow then 100 % Brightness RED and 100 % Brightness Green
。
: Set the LED color as Indigo then 100 % Brightness Blue and 100 % Brightness Green
。
: Reserved extended key
。
Used to Enable/inhibit the audio Synchronized mode supported
。
: Set the LED color as white then 100 % Brightness RED,100 % Brightness Green and 100 % Brightness Blue
: Set the LED color as Purple then 100 % Brightness RED and 100 % Brightness Green
。
: Set the individual RED brightness
。
There are 16 various option
。
: Set the individual Green brightness
。
There are 16 various option
。
: Set the individual Blue brightness
。
There are 16 various option
。
