alphatronics SL-19 DSB, Инструкция по эксплуатации

Страница: 9 / 15

16 17
ENGLISH
Start of television reception
Turn on the TV set at the main switch
When the Standby-LED illuminates, the TV set can be turned on by pressing the POWER
button on the remote.
When the KATHREIN antenna control is enabled, the question of whether the antenna should
be positioned will appear. Confirm with ENTER and the antenna will always position itself to
Astra1N at 19.2°.
It may take up to 90 seconds until a picture appears when the satellite moves out from the
retracted position to 19.2°. Next time, the system has remembered the last position and will
turn to that position in approximately 20 seconds.
Then, the first channel from the preset channel list will appear, usually "Das Erste" (ARD).
Tip: Should the antenna continue to rotate and take longer than 3min trying to find an appro-
priate satellite position, pressing the red button on the remote control (GoTo) will take you to
the control menu. Here, you should check the current location.
After the reconfirming the new request of the location with Enter, the antenna will again for
the position 19.2°.
When the positions are all known and the channel list also contains channels from other satel-
lites, the position of the antenna will switch when those channels are selected using the CH +
or CH - keys. The turning operation is displayed during this time.
If when extending the antenna there is a block of any kind such as branches, snow cover or ice,
a message will appear. Please then clear the rotation range of the antenna.