Alphatron EVF-035W-3G, Руководство по эксплуатации, Страница: 9 / 32

Electronic Viewfinder 9
• [F1](SCAN) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F1 Key”
menu.
- Default setting of F1 Button is Scan Mode.
• [F2](ASPECT) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F2 Key”
menu.
- Default setting of F2 Button is Aspect.
• [F3](MARKER) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F3 Key”
menu.
- Default setting of F3 Button is Marker Enable.
• [F4](L(Y’)ZoneCheck) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F4 Key”
menu.
- Default setting of F4 Button is L(Y’)Zone
Check.
• [MENU<EXIT>/SOURCE] Button
- Press the button for less than 2 seconds to
activate the main OSD menu.
- Used to return from sub menu to main menu.
- Press the button for more than 2 seconds to
change the Input Signal. (SDI <--> HDMI)
(SDI, HDMI)
• [UP/DOWN/ENTER] Rotary Control
- When OSD menu is inactivated, press
the Rotary Control to adjust the value of
Brightness, Contrast, Chroma or Aperture.
- Also the Rotary Control is used to decrease or
increase the value of the selected feature.
• [CAL.]
- This terminal is for firmware upgrade or color
calibration by using the Tool made by TVLogic.
• [USB] Port
- Used to update new program for future
enhancements.
• [SDI-IN] (BNC)
- Signal input terminal for SD/HD SDI.
• [SDI-OUT] (BNC)
- SD/HD-SDI Signal Output which is input
through [SDI-IN] terminal.
• [HDMI] IN
- Signal input terminal for HDMI signal.
• [HDMI] OUT
- Signal output terminal for HDMI signal.
•
BATTERY IN
- Battery Power Input : DC 6.8 ~12V
* Rated Power Input : DC 6.8 ~ 18V
* D-Tap to mini XLR connection.
• DC POWER IN (Mini XLR 4P)
- DC power input terminal for DC 12V.
<Warning!!>
When using the product make sure to ground
the product before connecting the input
signal line. The unit may not operate properly
if the input line is connected before the GND is
connected.
4. Control & Functions
SIDE BOTTOM/REAR