Alphasonik PBAT10E, Руководство пользователя

Страница: 10 / 16

I
N
S
T
A
L
L
A
T
I
O
N
C
O
N
T
I
N
U
E
D
Investigate the layout of your vehicle thoroughly before drilling or
cutting. Take care when you work near the gas tank, gas lines, hydraulic
lines, electrical components and electrical wiring. Do not use the equipment
unmounted. Attach this system securely to prevent damage, particularly in
the event of an accident or aggressive driving. Do not mount the system so
that wire connections are unprotected or are subjected to pinching or damage
from nearby objects. Before connecting or disconnecting power connections
at the system power terminals, disconnect the +12V DC wire at the battery
end. Confirm that your source unit and other equipment are turned off while
connecting the input terminals. If you need to replace the power fuse, replace
it only with a fuse identical to the provided fuse. Using a fuse of different type
or rating may result in damage to the system, which is not covered by the
manufacturer’s warranty. Do not install any product where it may be subject-
ed to excessive heat, moisture and dust or where it may be repeatedly kicked,
brushed or bumped. Make absolutely sure that the terminals for the products
are connected to the proper inputs and outputs from the music source. Never
run the wiring on the outside of the vehicle or under it where it can be dam-
aged by road hazards or any moving parts of the vehicle. Use existing wire
channels, sills, panels and molding strips inside the vehicle to hide the wiring
for safety and a neat appearance.
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part of the
vehicle’s safety or structural support system. If you are unsure, it is best to
have the product professionally installed by an Authorized Alphasonik Dealer.
Never sacrifice your safety for sound.
9