Alphard Golf USA eWheels Club Booster, Руководство пользователя, Страница: 8 / 18

8
Adjusting the Wheelbase
The wheelbase (length between the wheels) can be adjusted to fit different cart frames. This procedure
is only
necessary if there is a gap wider than 1” on the outside of both Ax le Clamps when they are placed
on the Club Booster Axle. Most 3-wheel carts have a wider wheelbase than 4-wheel carts.
Adjusting the Wheelbase:
Step 1
Unfold your push cart. Measure the distance from the
outside edge of one Axle Clamp to the outside edge of the
other.
Step 2
Fully extend the wheels on the Club Booster. Rotate the
main body so the Console is facing downward and remove
the screws on the Stoppers.
Step 4
Slide the wheels inward until the distance between the tube
ends matches the distance you measured.
Step 5
Slide each wheel outward until the holes on the tube align
with the hole on the Stopper.
Step 6
Fasten the screw tightly again.
Measure