USER MANUAL 601 en
Seite 6 von 9
Vers. 08/2018
2.10 Message Alarm
This feature allows you to set a one-time or daily alarm for a selected personal message. You can set an alarm for up to
five personal messages. When a message alarm is set, replaces
in the Message-status screen. At the time the
alarm sound,
is again displayed unless the alarm is set to alert daily. Press
to display the message for which the
alarm is set. If the alarm times passes without being acknowledged, flashes until the message is read.
2.10.1 Set a One-time Message Alarm
(1)
From the Message-status screen, press , , to select the message you want to alarm.
(2)
Press .
(3)
Press to move the cursor to .
(4)
Press
The Set-message-alarm screen is displayed.
Example of Set-Message-Alarm Screen
The alarm symbol shows the current alarm status.
is displayed if the message alarm is enabled, is displayed if
the message alarm is disabled.
(1)
Press
until
is displayed.
(2)
Press to move the cursor to the hour digits.
(3)
Press
to adjust the hour digits.
(4)
Repeat steps 2 and 3 to adjust the minutes, AM/PM/24 Hr., and Date.
(5)
Press to activate your selection.
You can also set a message alarm while reading the message by following steps 1 through 5 above.
2.10.2 Set Daily Message Alarm
(1)
Follow steps 1 through 8 to set the message alarm time.
(2)
When setting the date in step 8, press
, until you see double dashes for the month, day and year (--/--/--).
(3)
Press to activate your selection. The alarm is now set to alert every day at this specified time.
2.11 Private Time
You can select a time period during which your pager is completely silent. Your pager still receives messages but is does
not alert. The pager alerts only if an alarm expires or a priority message is received.
2.11.1 Set Private Time
(1)
Press .
(2)
Press to move the cursor to .
(3)
Press
.
(4)
Press and release
until
is displayed.
(5)
Press to disable private time.
When the Private-time screen is first displayed, the cursor is at the flashing symbol on the far left, indicates private
time is enabled,
indicates private time is disabled.
Example of Set Private-Time Screen
