manualshive.com logo in svg

alphainnoTec WZS 41-101H/SX, Руководство по эксплуатации

Поделиться
Скачать
alphainnoTec WZS 41-101H/SX Скачать руководство пользователя страница 25

25

We reserve the right to modify technical specifications without prior notice.
83063900cUK – Translation of the operating manual 

© ait-deutschland GmbH

The initial filling and commissioning of the hot water 
tank must be carried out by a qualified technician.

 

Ensure sure that…

•

 the water supply to the domestic hot water tank 

is open.

•

  the domestic hot water tank is filled. 

 

  Operating manual of the heating and heat pump 

regulator.

SAFETY TEMPERATURE LIMITER

A safety temperature limiter is built into the electric 
heating element. Please check whether or not the reset 
knob of this safety temperature limiter has jumped out. 
If this is the case, push in the button.

1  Safety temperature button on 

electric heating element

2  Reset knob

Dismantling

 DANGER!

 

Risk of fatal injury due to electric shock!

 

Electrical connections may be installed 
only by qualified electricians.

 

Before opening the unit, disconnect the 
system from the power supply and secure 
it from being switched back on!

 WARNING!

 

Only qualified electrical technicians are 
allowed to disconnect the unit from the 
power supply and de-install all electrical 
connections.

 WARNING!

 

Only qualified heating or cooling system 
technicians are allowed to remove the unit 
from the system.

 ATTENTION

 

The anti-freeze mixture of the heat source must 
not be allowed to enter the sewer system.

 

Collect anti-freeze mixture and dispose of pro-
perly.

 WARNING!

 

Only qualified cooling system technicians 
are allowed to dismantle the unit and its 
components.

 ATTENTION

 

Recycle or provide for proper disposal of unit 
components, refrigerants and oil in accordance 
with the applicable regulations, standards and di-
rectives.

Содержание WZS 41-101H/SX













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды