AlphaGen ACX3100i, Руководство по эксплуатации

Страница: 12 / 42

12 041-037-B000-001, Rev. A (06/2013)
2.4 Starting the Engine with Ignition Key
• When starting the generator after adding fuel for the first time or after long term storage, or after running out of
fuel, turn the fuel valve to the ON position, then wait for 10 to 20 seconds before starting the engine.
• Before starting the engine, disconnect any load from the AC receptacles.
NOTE:
1. Turn the fuel valve lever to the ON position.
2. Move the remote selector switch on the control panel to OFF.
3. Turn the ignition switch to the START position until the engine has started. Do not operate the starter
for more than 10 seconds. Repeat if necessary.
2.5 Starting the Engine Manually
1. Turn the fuel valve lever to the ON position.
2. Move the remote selector switch to the OFF position.
3. Turn the ignition switch to the ON position.
4.
Pull the starter grip lightly until resistance is felt, then pull briskly out (see Figure 2-3).
• Do not allow the starter grip to snap back. Return it slowly by hand.
• Do not let the starter rope rub against the generator body or the rope will wear out prematurely.
CAUTION!
2.0 Operation
Figure 2-3, Starting the Engine
OFF
ON
START
OVERLOAD
RUN
LOW OIL
OVERLOAD
RESET
STOP
12 V DC 8.3 A
ON
OFF
REMOTE
CONTROL ECONOMY
SWITCH
START
ON
OFF
HOURS 1/10
BATTERY CHARGE
ON OFF
ON
OFF
120 V AC RECEPTACLES
120 V AC CIRCUIT BRE
AKERS
20 A
30 A
20 A
30 A
OFF
ON
START
OVERLOAD
RUN
LOW OIL
OVERLOAD
RESET
STOP
12 V DC 8.3 A
ON
OFF
REMOTE
CONTROL ECONOMY
SWITCH
START
ON
OFF
HOURS 1/10
BATTERY CHARGE
ON OFF
ON
OFF
120 V AC RECEPTACLES
120 V AC CIRCUIT BRE
AKERS
20 A
30 A
20 A
30 A
Manual Start
OFF
ON
START
OVERLOAD
RUN
LOW OIL
OVERLOAD
RESET
STOP
12 V DC 8.3 A
ON
OFF
REMOTE
CONTROL ECONOMY
SWITCH
START
ON
OFF
HOURS 1/10
BATTERY CHARGE
ON
OFF ON
OFF
120 V AC RECEPTACLES
120 V AC CIRCUIT BRE
AKERS
20 A
30 A
20 A
30 A
Electric Start
Remote Switch
Fuel Valve
Ignition