background image

IMPORTANT - READ FIRST

Resistance training, gymnastics training and activities at height are potentially dangerous and may lead to severe injury or even death. This 

equipment must only be used by competent and responsible persons, or under the direct and visual control of a competent and responsible person. 

Use common sense when training, obtain instruction to ensure safe execution of movements.
Obtaining instruction in appropriate techniques and methods of use is your own responsibility. You assume all risks and responsibilities for all 

damage injury or death which may occur during or following incorrect use of this equipment in any matter whatsoever. AlphaFit bears no liability 

beyond the replacement value of the equipment in question.
It is the responsibility of the owner to ensure that all users of this product are adequately informed of all precautions. The safety and integrity 

designed into the equipment can only be maintained when it is regularly examined for damage and repaired. It is the responsibility of the user/

owner to ensure that regular maintenance is performed. Inspect and properly tighten all parts regularly. Replace any worn or damaged parts 

immediately and do not use until the equipment has been repaired.
Both AlphaFit and buyer disclaim any express or implied warranty, including, without limitation, warranties or merchantability and/or fitness for a 

particular purpose with respect to the equipment.
WARNING: MISUSE OF THIS EQUIPMENT CAN RESULT IN SEVERE INJURY OR DEATH. BUYER ASSUMES ALL LIABILITY IN USAGE OF 

EQUIPMENT.

CORE CABLE CELL

ASSEMBLY GUIDE

Содержание CORE CABLE CELL








Отзывы: