15
14.12
MIXED DEAl MODE OPERATION
STORING MIXED DIAl MODE NUMBERS
If you are connected to an exchange requiring pULSE dialling and you wish
to route your calls via an alternative carrier (if available), it is necessary to
dial an ACCESS code in pULSE mode followed by a pause and then an
AUTHORISATION code in TONE mode. Since the telephone numbers of all
calls to be re-routed via the alternative carrier will have to be preceded by
the same access and authorisation codes, it is convenient to store them in a
memory location.
For example, if your access code is 123 and your authorisation code is
4567890 and you wish to store the combined codes in memory location
M1, you would proceed as follows:-
1. Seize the line in any mode.
2. press STORE button once.
3. Key in 123
4. press TONE button (this changes the dialling mode to tone)
5. press pAUSE button to introduce a pause, Note that it may be necessity
to introduce a second pause but do not enter more than 2 or incorrect
operation may result.
6. Key in 4567890
7. press M1 button
8. Release the line.
During the storing process, the number will be displayed in the LCD.
To dial a number via the alternative carrier, lift handset or press Speaker
button, await dial tone, press M1 button and then dial the telephone number
you are calling. Alternatively, press the M1 button followed by another
memory button if the called number is stored in a memory location.
14.13
RECAll BUTTON
This is generally only used when the telephone is connected to a pABX
(private Automatic Branch Exchange) and gives access to features provided
by that exchange. However, RECALL is becoming a feature on the new
digital exchanges to give access to new services such as some of BT’s
Network Services.
For full information on the use of the RECALL button, please consult your
pABX instructions or your Network Operator providing the services.
For setting the correct RECALL mode, please refer to section under
‘INSTALLATION’.
12.10 DIALLING NUMBERS FROM MEMORY
To dial a number from memory, lift handset or press Speaker or Headset button, await
dial tone and press button corresponding to memory location require ensuring that the
correct memory ‘shift' is selected.
Sometimes it may be necessary to combine the information from 2 memories or to
combine memory dialling with manual dialling. In these cases, simply press the 2 memory
buttons in sequence or press the desired memory button followed by manual dialling of
the remainder of the number.These combinations are often carried out when alternative
carriers are used.
12.11 PAUSE FACILITY
With some PABX’s, it is necessary after dialling an outside line access digit (often 9) to
wait for new dial tone before dialling the outside number. If the PAUSE button is pressed
after the access digit has been dialled, the number may be dialled immediately without
waiting for new dial tone as the telephone will introduce the required pause in the
dialling sequence. In some cases it may be necessary to introduce a second pause, but do
not enter more than 2 pauses or unsatisfactory operation may result.
12.12 MIXED DEAL MODE OPERATION
STORING MIXED DIAL MODE NUMBERS
If you are connected to an exchange requiring PULSE dialling and you wish to route
your calls via an alternative carrier (if available), it is necessary to dial an ACCESS code
in PULSE mode followed by a pause and then an AUTHORISATION code in TONE
mode. Since the telephone numbers of all calls to be re-routed via the alternative carrier
will have to be preceded by the same access and authorisation codes, it is convenient to
store them in a memory location.
For example, if your access code is 123 and your authorisation code is 4567890 and you
wish to store the combined codes in memory location M1, you would proceed as
follows:-
1.
Seize the line in any mode.
2.
Press STORE button once.
3.
Key in 123
4.
Press TONE button (this changes the dialling mode to tone)
5.
Press PAUSE button to introduce a pause, Note that it may be necessity to
introduce a second pause but do not enter more than 2 or incorrect operation may
result.
6.
Key in 4567890
7.
Press M1 button
8.
Release the line.
During the storing process, the number will be displayed in the LCD.
To dial a number via the alternative carrier, lift handset or press Speaker button, await
dial tone, press M1 button and then dial the telephone number you are calling.
Alternatively, press the M1 button followed by another memory button if the called
number is stored in a memory location.
-12-
1 2 3 4 5 6 7 8 9 0
JD081 NR205HP User Guide final 6/11/06 10:42 Page 14