Alphacom a200, Руководство пользователя, Страница: 8 / 15

7
7. Utilisation of Controls
The button functions are as follows:
0 - 9 - Dialing digits.
* - # - Dialling codes for MF signalling
Recall - For use on pbx or for star services
LnR - Last number redial function
Tone - Switches from Loop Disconnect to DTMF during dialling
pause - Insert a pause in the dial sequence
Mute - To prevent the other party from hearing you (ie. push (on
handset) down to mute) or, alternatively, on specially adapted
models this can be amended to push-to-speak. In this
instance, the phone will be clearly marked as such.
Latchable Mute - To prevent the other party from hearing you (i.e. push
(on base) to (on base) mute). LED will illuminate when in use. push
button again to continue normal (two-way) conversation.
Headset - To enable headset operation, LED will illuminate when in use.
The switch functions are as follows:
Ring vol - Allows you to set the level of the ringer loudness
Ring pitch - Allows you to set the pitch of the ringer
ELR/TbR - Sets the Recall to Earth (ELR) or Timed break (TbR) Recall
Tone / pulse Dialling - Tone or pulse dialling selector switch
Memory protection - Allows you to protect numbers stored in memory location
Message Waiting - Set the message waiting to 4 or 6 line configuration
visual Indicators: Ring - This indicates an incoming call by lighting up.
Message Waiting - Operates where pAbx message waiting is operational