2.0 Installation, Continued
12
018-354-B0-001, Rev. A (05/2018)
2.2 Horizontal Installation Procedure
1. Attach the GPS Antenna (
PN: 670-025-19
) to the SMG (
PN: 018-354-22-001
) using a 13/16” wrench and the
included right angle adapter (
PN: 659-014-10
) as shown in the image below. Torque to 15 – 20 in-lbs (1.7 – 2.3
N-m).
2. Using the hex head bolts, lock washers, and flat washers, secure the strand brackets (
PN: 746-627-22-001
) to the
SMG, torquing to 44.3 – 53.1 in-lbs (5 – 6 N-m). Verify proper orientation as shown in the image below.
Fig. 2-6, Horizontal Bracket Installation
3. Hang both brackets on the strand through the clamps on the bracket as shown. For thicker 3/8” strands, reverse
the orientation of the clamp so that the larger concave side faces the strand. Insert the carriage bolt through the
back of the bracket and tighten the hex head nut, lock washer, and flat washer against the clamp on the front of
the bracket, torquing to 79.7 – 88.5 in-lbs (9 – 10 N-m). Repeat for the second bracket.
Fig. 2-7, Horizontal Clamp Installation
