900-0117-01-00 Rev C
29
Operation
The MATE3 provides the means for programming OutBack inverter/chargers, charge controllers, and
battery monitors when preprogrammed default settings do not work for the destined installation.
IMPORTANT:
The OutBack inverters have nonvolatile memory and will retain any settings
that have been changed, even after the MATE3 is removed. If a system does
not have a MATE3, an installer can bring a MATE3 to the site temporarily,
install it, change the settings, and then remove it.
IMPORTANT:
Some functions are not based in the inverter or charge controller, but are
part of the MATE3’s firmware. They will not function if the MATE3 is
removed. These functions are listed beginning on page 115.
Display and LED Status Indicators
Figure 18
Display and LED Status Indicators
Battery Status LEDs (x3)
LCD Screen
Inverter LED
Charger LED
Generator LED
Events LED
AC Input LED
Favorite LED
Network Status LEDs
1
(located on back)
1
Solid yellow indicates the ethernet link is established.
Blinking green indicates network activity.
Abbreviated Manual for Mate 3
Prepared by Miller Solar
For emergencies: 805-438-5600
We have deleted unnecessary information so you do not need to read more than the
minimum, enhancing your understanding of the really important points. We will provide
training on the use and maintenance of your system.
if you wish to learn more about your Mate3 and associated equipment, please refer to the
complete manual sets.
Below is an overview of the Mate 3 controller. The unit will allow you to read critical values
on your power system, make some adjustments and initiate important operations, such as
starting the generator or starting an equalization charge (see attached battery instructions).
Содержание OutBack POWER MATE3
Страница 6: ...GRID TIED...
