Alpha ECOGRDW5, Инструкция по эксплуатации

Страница: 7 / 16

7
INsTallaTION Of ThE DusT COllECTION COVER
WARNING!
1. Be sure to turn off the high-speed angle grinder and remove the plug from
the electrical outlet before attaching and installing the Dust Collection Cover.
2. Make sure the Dust Collection Cover is securely attached; otherwise it may
come loose which could cause injury.
3. If you installed the Dust Collection Cover to a high-speed angle grinder but
the connector is loose and can not be securely attached, do not use the Dust
Collection Cover. Using it in this state could cause injury.
INsTallING TO makITa
®
, mIlWaukEE
®
OR bOsCh
®
hIGh-sPEED
aNGlE GRINDERs
1. Dismantle the original safety guard and
diamond cutting wheel from the high-speed
angle grinder.
2. Loosen the connector setting screws in the Dust
Collection Cover and leave loose.
3. Attach the connector to the wheel guard mount of
the high-speed angle grinder. Adjust the angle of
the Dust Collection Cover when attaching. (Fig. 1)
4. Using a Phillips screwdriver, tighten the two
setting screws securely. (Fig. 2)
CAUTION!
This Dust Collection Cover is solely designed for applications with diamond wheels.
Do not use with any other type of wheel such as a conventional abrasive cut-off
wheel or carbide tip saw blade.
(Fig.1)
(Fig.2)