6
d. Override Function
This mode is available when the device is operating in the AUTO mode. Press the Increase (+)
or Decrease (-) button on the front of the device to select the temperature required. This
temperature setting will remain as the target temperature until the next programme change,
when the device will return to AUTO. To cancel this mode and return to the AUTO mode, press
and hold the Increase (+) and Decrease (-) buttons at the same time for 3 seconds or slide the
front cover upwards (Fig. 6) and press OK.
e. Eco Mode
Using Eco mode, the same temperatures will run all day long or until any user intervention is
made.
When the device is operating in the AUTO mode, press the Mode button 1 time and flashing
Auto
appears, then press OK and Eco mode is selected.
In Eco mode the temperature set is the average temperature that you have in your
programme, i.e. if you have 4 different temperatures in your AUTO programme (i.e. 17°C,
19°C, 20°C, 22°C) then the result of this average will be 19.5°C.
This value (19.5°C) will be the starting point to increase or decrease the temperature level
permanently until manually stopped by pressing OK. If you press the Increase (+) or
Decrease (-) button you can increase/decrease the new temperature set value. After 3
seconds, this value will remain until OK is pressed.
The AUTO programme can be returned at anytime by pressing the OK button.
f. Cleaning Mode
When the device is operating in the AUTO mode, press the Mode button 2 times until the
cleaning appears, then press OK.
This mode sets the device into total OFF mode during a pre-set time of 2 hours. After
cleaning time has ended, the device returns to AUTO mode. During the Cleaning Mode the
frost protection function will still operate. To cancel and return to AUTO, press the Esc
button.
g. Countdown Mode
When the device is operating in the AUTO mode, press the Mode button 3 times until the
countdown appears, then press OK.
This mode runs at the set temperature during a certain period of time (1 to 23 hours).
Press the Increase (+) or Decrease (-) button to select the required room temperature, then
press OK.
Press the Increase (+) or Decrease (-) button to select the required number of hours, then
press OK.
At the end of the set period the device goes into OFF mode, the frost protection function will
still operate. To cancel this mode and return to AUTO, press and hold the Esc button for 3
seconds.
