Alpha Technologies Tri Power X33 HIMOD HP, Руководство пользователя

Страница: 16 / 58

HIMOD_HP_MANUAL_vers0116_E
- 16 -
HIMOD HP B
ATTERY
C
ABINET
The HIMOD HP Battery Cabinet consists of 9 shelves, each of which may contain 4 Battery Units (BU). The BU contains 10 of
12V battery packs (ref to “Modules and Units” chapter).
The HIMOD HP Battery Cabinet has an electronic supervision system which, through voltage and current sampling, is able to
measure the condition and any anomaly of each BU. The collected data are sent to the system through a data bus and shown on
the display of the HIMOD HP UPS Cabinet.
Furthermore, on the HIMOD HP Battery Cabinet there is a SWBATT disconnection switch which allows to disconnect the BUs
from the connection line to the HIMOD HP Power Cabinet. The cabinet features also an opto-isolated input which allows the
remote opening of the SWBATT.
CAUTION: each shelf of the HIMOD HP Battery Cabinet can be filled (with the 4 BUs) based on the autonomy requirements
of the system (up to a maximum of 9 shelves). The minimum number of the complete battery shelves must follow the
rule on table:
Number of non redundant PMs Minimum number of battery shelves
1 2
2
5
3 9
4 12
.. ..
N
Nx3
Multiple HIMOD HP Battery Cabinets, up to 10, can be present in the HIMOD HP UPS System.
The system features a single battery supply, therefore even if multiple HIMOD HP Power Cabinets are present, all the HIMOD HP
Battery Cabinets must be shared.
A wiring diagram of the HIMOD HP Battery Cabinet is provided below.