- -
12
Writing the parameters being set in the gate:
To enable
communication with
the gate, it is always
necessary to enter an
access password
identical with the
password set in the
gate.
To save the
parameters currently
set in the program in
the gate, click on the “Write” button. All program elements will
be transferred in the gate. After data transfer, the gate will be
reset automatically.
Note:
During data transfer from or in the gat e, the corresponding
button will always “turn grey” and the colour indicators in the
button will indicate the type of the transfer (yellow for data
send, green for data receive).
If any error occurs during transfer or the access password
does not work, the program will react with an error message.
Do not forget to turn the appropriate com1 or com4 on!
Parameters reading from and saving in your PC:
The parameters read from the gate or the parameters set
manually in the program can be processed using either the
“Read from PC” or “Save in
PC” buttons. After displaying
a
standard
dialogue,
an
already existing file can be
selected (parameters reading
or rewriting any of the existing
files) or a new name entered
(when saving parameters). We recommend observing the
preset suffix to allow better orientation. When starting the