Carbon Fiber Electric Scooter - Stealth Carbon Gen III
E&OE
© 2019 Alpha Scooters
3
General Electrical Safety
•
Inspect electrical equipment, extension
cords, power bars, and electrical fittings for
damage or wear before each use. Repair or
replace damaged equipment immediately.
•
Ensure all power sources conform to
equipment voltage requirements and are
disconnected before connecting or
disconnecting equipment.
•
When wiring electrically powered
equipment, follow all electrical and safety
codes.
•
Wherever possible, use a residual current
device (RCD).
•
High voltage / high current power lines may
be present. Use extreme caution to avoid
contact or interference with power lines.
Electrical shock can be fatal.
General Electrical Safety
•
Electrically grounded equipment must have
an approved cord and plug and be
connected to a grounded electrical outlet.
•
Do NOT bypass the ON/OFF switch and
operate equipment by connecting and
disconnecting the electrical cord.
•
Do NOT use equipment that has exposed
wiring, damaged switches, covers or
guards.
•
Do NOT use electrical equipment in wet
conditions or in damp locations.
•
Do NOT use electrical cords to lift, move or
carry equipment.
•
Do NOT coil or knot electrical cords, and
ensure electrical cords are not trip hazards.
General Service Information
•
The equipment must be serviced or
repaired at authorised service centres by
qualified personnel only.
•
Replacement parts must be original
equipment manufacturer (OEM) to ensure
equipment safety is maintained.
•
Do NOT attempt any maintenance or repair
work not described in this manual.
•
After use, the equipment and components
may still be hot – allow the equipment to
cool and disconnect spark plugs and/or
electrical power sources and/or batteries
from it before adjusting, changing
accessories or performing repair or
maintenance.
•
Do NOT adjust while the equipment is
running.
•
Perform service related activities in suitable
conditions, such as a workshop.
•
Replace worn, damaged or missing
warning/safety labels immediately.
Electric Scooter Safety
Riding can be a hazardous activity. Certain conditions may cause the equipment to fail without fault of the manufacturer. The product can and is
intended to move, and it is therefore possible to lose control, fall-off and/or get into dangerous situations that no amount of care, instruction or
expertise can eliminate. If such things occur, you can be seriously injured or die, even when using safety equipment and other precautions.
RIDE
AT YOUR OWN RISK AND USE COMMON-SENSE. FAILURE TO USE COMMON-SENSE AND HEED ALL SAFETY WARNINGS AND
RECOMMENDATIONS INCREASES RISK OF INJURY. USE THE PRODUCT ONLY WITH APPROPRIATE CAUTION AND SERIOUS
ATTENTION TO SAFE OPERATION.
Appropriate Rider Use and Parental Supervision
•
The recommended minimum rider age of 8 years is an estimate only, and can be affected by the rider’s size, weight or skills. Any rider unable to
adequately understand the controls or techniques required to ride the product should not attempt to ride it. A parent’s decision to allow his or her
child to ride this product should be based on the child’s maturity, skill and ability to follow rules.
•
DO NOT EXCEED THE WEIGHT LIMIT OF 120KGS
. Rider weight does not necessarily mean a person’s size is appropriate to fit or maintain
control of the product, moreover the ability of the product to safely support the loads placed on it due to rider weight.
Acceptable Riding Practices and Conditions
•
Always check and obey any local laws or regulations which may affect the locations where the product may be used. Ride defensively. Watch out
for potential obstacles that could catch the wheels or force you to swerve suddenly or lose control. Avoid pedestrians etc who may enter your
path and respect the rights and property of others.
•
The product is meant to be used on private property and on closed courses and not on public streets or pavements. Do not ride in any areas
where pedestrian or vehicle traffic is present.
•
Do not activate the product unless you are in a suitable environment for safe riding.
•
The product is not for indoor use.
•
This product was manufactured for performance and durability but are not impervious to damage. Stunts or other aggressive riding can over-
stress and damage the product, and the rider assumes all risks associated with how the product is looked after.
•
Be careful and know your limitations. Risk of injury increases as the degree of riding difficulty increases. The rider assumes all risk associated
with aggressive riding activity.
•
Maintain a hold on the handlebars at all times.
•
Never carry passengers or allow more than one person at a time to ride the product.
•
Never use near steps, drops or bodies of water, such as swimming pools.
•
Keep your fingers and other body parts away from the wheels and all other moving components.
•
Never use headphones or a phone when riding.
•
Never hitch the product to another vehicle or person.
•
Do not ride the product in rain or wet conditions and never immerse the product in water – electrical components may be damaged by water or
create other possible unsafe conditions.
•
Bumpy, slippery, uneven or rough surfaces may increase risks.
•
Do not touch the brakes or electric motor when in use and/or immediately after riding as they can become very hot.
•
Do not ride at night or when visibility is limited.
