6.5.2 Main Menu Screen
The main menu screen (Figure 54) shows the Alpha FXM current input and output values, displays any faults or
alarms and gives access to the submenus. The complete menu tree is shown in Figure 55.
HyperTerminal runs on a command line system:
a.
The program does not recognize the backspace or delete keys even if it appears that way on the monitor.
b.
To access a particular submenu, type in the submenu number and press Enter. The Alpha FXM is
controlled by submenu 3.
c.
To update the main menu screen, press Enter.
d.
If you make a mistake and press Enter, the Alpha FXM echoes the command back exactly as you typed it.
Press Enter and reenter the correct command.
e.
The readings on the main menu screen do not automatically update to reflect changes in the Alpha FXM
status. Press
Enter
to update the screen.
f.
For many functions you need to enter a password. The factory setting is
1111
.
Submenu Numbers
Line Status Table E
Output Status Table
F Faults Table G
Alarms Table H
Figure 54 — Main Menu Screen
Page
64
to
95
