Page 11 of 33
9
The Normal Display screen
When the SADPminiEx is ON, it displays the moisture level of the gas that the sensor is
exposed too. When the head is lowered, the sensor is no longer exposed to the gas and is
dried down by the desiccant in the head.
Examples of the Main Display Screen
The Display always shows the current moisture level that the internal sensor is exposed
too. The current engineering units are clearly indicated on the display as well as any
pressure compensation performed.
10
SADPminiEx operating principles
Two distinct and separate menus control the SADPminiEx. These menus are described in
separate sections below:
10.1
Navigating through Menus
The SADPminiEx is predominantly menu driven. To navigate around the menus use the
‘
’ and ‘
’ keys to move the cursor bar (negative image) through the options available
within the menu and use the ‘ ’ key to select the option required. The ‘
’ key has no
function within menu screens.
10.2
Entering Numerical Data
The basic principle used to enter numerical values is described here.
The display will indicate a number in a format appropriate to the required input, the first
character of which will be displayed as a negative image to indicate it is active. Use the
‘
’ and ‘
’ keys to select the required number between 0 and 9 then press the ‘
’
key to select and proceed to the next character. Continue this process until all characters
-27.4
ºC Dewpoint
@ 1.0barg
9144
ppm[V]
Moisture Reading
Moisture Units
Pressure Value and units
