Page 2
Eagle 800 Series II Service Manual
Rev. A00
Figure 1: Static Protection Wrist Strap
HARDWARE CONFIGURABLE OPTIONS
The following sections summarize the configuration options available to let you tailor your hardware to
your needs. Most of these options require access to the main circuit boards inside the computer, and
should be performed only by qualified technical personnel. Contact your VAR if you need assistance.
Printed Circuit Board Configuration
Eagle 800 Series II CPU Board
The Eagle 800 Series II CPU board is the primary board of the system. Most other boards contained in
the system actually plug into the CPU board, including the memory DIMMs, the multifunction I/O board,
and other special function boards. This board also contains the following circuitry:
•
One Sempron high speed processor (socket 754)
•
Dual UDMA-66/100/133 Bus Master Interface for support of ATA IDE and ATAPI devices
•
Integrated SATA controller with two SATA drive connectors
•
Integrated Ethernet controller, 10/100 Mbps operation
•
Two DDR DIMM sockets for support of up to 2GB of PC3200 SDRAM
•
One 9-pin serial I/O port (with modem control)
•
One 25-pin SPP/ECP/EPP parallel port
