Alpha IP RTA 61001-N, Быстрая установка

Страница: 14 / 116

14
Commissioning
POL
RU
S
FIN
DA
N
SWE
NOR
ENGENG ENG
fig. 6 page 5). If batteries have already been inserted, press the system key
(C) for at least 4 seconds in order to activate the teach-in mode.
9 The teach-in mode is activated automatically for 3 minutes.
9 The device LED flashes in orange.
The LED will light up in green after a successful teach-in process. If the
LED lights up red, repeat the process.
5.1.2 Teach-in to Alpha IP Access Point
For a control via the Alpha IP app, the teach-in must of the RTA 61001-N1 must
be performed via the Access Point (HAP 21001). Teach-in the device as follows:
Ö The Alpha IP Access Point has been set up via the Alpha IP App (see instructions
HAP 21001).
1. Open the Alpha IP app on the smart phone.
2. Select the menu item Teach-in device.
3. Release the room control unit Analog from the installation bottom (see fig. 5
page 5).
4. Pull out the insulating strip from the battery compartment, or insert batteries (see
fig. 6 page 5). If batteries have already been inserted, press the system key
(C) for at least 4 seconds in order to activate the teach-in mode.
5. The device is displayed automatically in the Alpha IP app.