DEU
ENG
FRA NDL ITA ESP DAN/NOR
FIN
SWE POL RUS
29
Resetting factory settings
Alpha IP WTH 61001
9 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. The cloth may
be moistened with lukewarm water for the removal of heavier contam-
ination. Use a solvent-free cleaning agent for cleaning.
10 Resetting factory settings
All settings will be lost when the factory settings are restored.
1. Pull the device from the frame and the mounting plate (see „Chang-
2. Remove the batteries.
3. Re-insert the batteries according to the marking into the battery
compartments. Simultaneously, press and hold the System key (see
„Device overview“ on page 21) for 4 seconds until the LED flashes
rapidly in orange. The display shows “rES”.
4. Release the System key.
5. Press the System key again for 4 seconds until the LED lights up in
green.
6. Release the System key again.
9
The device restarts.
9
The factory settings are reset.