manualshive.com logo in svg

Alpha-InnoTec LW 140 L, Руководство по эксплуатации, Страница: 14 / 68

Поделиться
Скачать
Alpha-InnoTec LW 140 L Скачать руководство пользователя страница 14

14

Subject to change without notice |  83054400dUK – Translation into English of the original German operating manual |  ait-deutschland GmbH

  Push the screws M12 x 40 (2x) supplied through the 

fan and the top metal tab and secure with nuts M12…

  Lower the unit at the installation location. Make 

sure that the frame of the unit is in full contact with 
the underlying surface and the unit is positioned 
horizontally…

 

Undo the mounting nuts at the top metal tab and 
remove the corresponding screws.

 

Then pull the fan out of the unit and screw tightly 
back onto the unit frame (do not forget the spring 
washers)…

  Remove guide rods and attach all facing panels back 

onto the unit.

INSTALLATION

Set the unit on a stable, solid and level, preferably sound-
insulated surface. Make sure that the foundation is de-
signed for the weight of the heat pump.

 ATTENTION

 

In the air outlet area the air temperature is ca. 
5 K below the ambient temperature. Under cer-
tain climatic conditions, therefore, an ice layer 
can form in the air outlet area.

 

Install the heat pump so that the air blower does 
not blow in the direction of footpaths.

 ATTENTION

 

Do not tilt the unit more than a maximum of 45° 
(in any direction).

 NOTICE.

 

Always observe the installation plan for the re-
spective model. Note the size and minimum 
clearances.

  Installation plan for respective model.

Set up the unit so that the switch cabinet side (= operat-
ing side) is accessible at all times.

MOUNTING THE AIR DUCTS

 NOTICE.

 

Note the air blow-out direction of the unit.

– 

Units with the abbreviation L in the model desig-
nation blow the air out to the left (when viewed 
from the control side).

 ATTENTION

 

Use only original accessories or air ducts rec-
ommended by the manufacturer (fibreglass light-
weight concrete ducts).

 

Mount air ducts only according to the installa-
tion plan for the respective unit.

  Installation plan for respective model.

WALL DUCT(S) ASSEMBLY

  Remove the parts necessary for the assembly of the 

wall duct(s) from their respective boxes...

  Next, interlock the 2 pieces of the wall duct(s) that 

belong together, as illustrated in the following draw-
ing. Use the lubricant supplied upon delivery to help 
in this process...

Содержание LW 140 L





































































Отзывы:

Нет отзывов