Alpha-InnoTec LW 140 A/RX, Руководство по эксплуатации

Страница: 4 / 48

4
We reserve the right to modify technical specifications without prior notice.
83051400aUK
© Alpha-InnoTec GmbH
Intended use
The unit may be used only for the intended purpose.
That means:
•
for heating.
•
for cooling.
•
for heating hot water.
The unit may be operated only within its technical pa-
rameters.
overview “Technical data / scope of delivery”.
notIce
notify the responsible power supply com‑
pany of the use of a heat pump or heat
pump system.
Disclaimer
The manufacturer will not be liable for damage resulting
from unauthorised use of the unit.
The manufacturer’s liability will also be voided in the
following cases:
•
if work is performed on the unit and its compo-
nents in a manner that does not comply with the
terms of this operating manual;
•
if work is performed on the unit and its compo-
nents in an improper manner;
•
if work is performed on the unit that is not
described in this operating manual, and this work
was not expressly approved in writing by the
manufacturer;
•
if the unit or components in the unit are modified,
redesigned or removed without the express
written permission of the manufacturer.
eC conformity
The unit bears the cE mark of conformity.
Ec declaration of conformity
safety and security
The unit is operationally safe when used for the intended
purpose. The construction and design of the unit
conform to the state of the art, all relevant dIN/vdE
regulations and all relevant safety regulations.
Every person who performs work on the unit must have
read and understood the operating manual prior to
starting any work. This also applies if the respective per-
son has already worked with such a unit or a similar unit
or has been trained by the manufacturer.
Every person who performs work on the unit must
comply with the applicable accident prevention and safety
regulations. This applies in particular to the wearing of
personal safety gear.
Danger!
Danger of fatal injury due to electric
shock!
electrical connections may be installed on‑
ly by qualified electricians.
Before opening the unit, disconnect the
system from the power supply and secure
it from being switched back on!
Danger!
only qualified technicians (trained heating,
cooling, refrigerant and electrical techni‑
cians) may perform work on the unit and
its components.
WarnIng!
observe safety labels on and in the unit.
WarnIng!
Unit contains refrigerants!
Leaking refrigerant could result in
personal injury or material damage.
therefore:
– shut down unit.
– notify the manufacturer’s authorised
service centre.
attentIon
for safety reasons:
Never disconnect the unit from the power sup-
ply, unless the unit is being opened.