Alpha ESS SMILE-B3-PLUS, Руководство по установке

Страница: 20 / 69

___________________________________________________________________
Alpha ESS Co., Ltd.
Page 20 of 69
Your Smart Energy
6. Mounting
6.1
Requirements for Mounting
WARNING
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
Basic Requirements
•
SMILE-B3-PLUS and SMILE-BAT-5P are suitable for indoor and outdoor use.
•
Do not install the product in a place where a person can easily touch it because
its housing and heatsink are hot during operation.
•
Do not mount the product in areas with flammable or explosive materials.
•
Do not mount the product at a place within children's reach.
•
Do not mount the product outdoors in salt areas because it will be corroded there
and may cause fire. A salt area refers to the region within 500m from the coast or
prone to sea breeze. The regions prone to sea breeze vary depending on weather
conditions (such as typhoons and monsoons) or terrains (such as dams and hills).
Mounting Environment Requirements
•
The product must be mounted in a well-ventilated environment to ensure good
heat dissipation.
•
When mounted under direct sunlight, the power of the product may be derated
due to additional temperature rise.
•
Mount the product in a sheltered place or mount an awning over the product.
•
The optimal temperature range for the battery pack to operate is from15 to 30
℃
.
•
Do not expose or place near water sources like downspouts or sprinklers.
•
If the battery pack is mounted in the garage, then ensure that it is above the
height of the vehicle bumper and/ or door.
Mounting Structure Requirements
•
The mounting structure where the product is mounted must be fireproof.
•
Do not mount the product on flammable building materials.
•
Ensure that the mounting surface is solid enough to bear the weight load.
•
In residential areas, do not mount the product on drywalls or walls made of similar
materials which have a weak sound insulation performance because the noise
generated by the product is noticeable.