ADM-XRC-7Z1 User Manual
V2.6 - 14th February 2022
4.1.2 LED Definitions
There are seven LEDs to provide a visual indication of the board status.
Their locations are shown in
DONE
D
1
0
D
8
D11
MVMRO
PWRFLT
FBS
D
9
D12
SWRST
SYS 0
D
6
D
5
SYS 1
D
1
7
D
19
D
20
D
21
D
22
D
2
3
ETH1
ETH0
Figure 2 : LED Locations
Comp. Ref.
Function
ON State
Off State
D5 (Green)
System Monitor
Status
D6 (Red)
System Monitor
Status
D8 (Green)
FPGA (PL)
Done
PL is configured
PL is not configured
D9 (Green)
Flash Boot
Enable
Enable PS booting PL from flash
Disable PS booting PL from flash
D10 (Amber)
MVMRO
Enable writes to non-volatile memories Inhibit writes to non-volatile memories
D11 (Red)
Power Fault
Power Supply Fault
Power Supplies off or within range
D12 (Green)
System Reset
PS is in Reset
PS is not in Reset
Table 6 : Main LED Definitions
Page 7
Functional Description
ad-ug-1253_v2_6.pdf
