Alpha Communications VPD-5000, Руководство пользователя

Страница: 10 / 12

TROUBLE SHOOTING
Trouble Shooting Guide
If a problem persists after trying the remedies suggested below, contact your local
dealer or our technical support or sales department
Unit totally dead (Power Lamp OFF)
- The power cord is not properly inserted in the AC outlet, or the power is not
supplied.- Check that the power ON/OFF switch is in the ON position.
Cannot gain enough volume when talking to other units
- Adjust volume with the button on the monitor (See page 6.)
Poor picture appears on the screen
- Make sure that the lens of outdoor camera is clean (Remove the transparent tape
attached on the outdoor camera after installation)
- After rain or when outside temperatures are very low, the camera lens may
temporarily fog over and cause a blurry image, but this is not malfunction and
normal operation will be restored when the moisture evaporates.
- The camera lens may be affected if it is in very bright direct sunlight from the sun or
artificial street or house light. When installing, if possible, choose a site that is partially
sheltered from direct light.
Can call and communicate, however, there is no audio signal
- Make sure the wiring between the monitor station and the camera station is
connected properly.
Chime tone sounds when you pick up the handset
- If one of monitors installed inside home has a defect or incorrect wiring, the normal
working monitor’s handset sounds a “Chime” tone to indicate to the user to check
the defective monitor.
Video Security Intercom System
| VDP-5000
16|17
SPECIFICATIONS
Main unit Monitor (VDP-M5F)
Flush Mount Camera (Standard)
The depth of camera on the table indicates from wall surface after installation
Remark Specifications
Voltage Requirements DC 12V
Power Consumption Maximum 8.5W, Stand by 1.0W
Monitor Screen B&W Flat 4 Flat type C.R.T
Maximum Wiring Distance 50m/165 feet (22 AWG, 0.65mm 4wire)
Audio Communication Duplex handset
Extensions Monitor
Environment
Temperature -10 C to +40 C
Humidity Below 90% (relative)
Size
Dimension 188W 208H 60D(mm) / 7-2/5W 8-1/5H 2-1/3D(Inches)
Weight 1.3 kg / 2.86 Ibs
Installation Surface Mount Type
Remark Specifications
Power Source DC 12V (Supplied from Monitor)
Power Consumption DC 12V, 0.25A
Display Output 1Vp-p/75, Composite EIA / CCIR
Illuminance 0.1 Lux(B/W)
Environment
Temperature -10 C ~ 40 C
Humidity Below 90% (relative)
Size
Dimension 120W 184H 16D(mm) / 4-3/4W 7-1/4H 3/5D(Inches)
Weight 0.5kg / 1.10 Ibs
Installation Flush Mount Type