6
It is prohibited to install the device at medical facilities. Radio signals from the device might
adversely affect the operation of some sensitive equipment and possibly cause a threat to human life.
It is prohibited to install the device in locations where the use of mobile phones is prohibited.
Install batteries observing proper polarity while device is not directly plugged into an electrical power
source.
Do not disassemble or attempt to repair the device on your own. In the event that repairs are required,
contact the Service Center.
Do not connect or plug in external devices or appliances with damaged or bent plug prongs.
Do not close and touch the contacts to each other on the Socket.
Do not place metal objects or stick your fingers into the Socket receptacle.
Do not expose the Socket to shaking and do not allow the Socket to fall, as this might cause damage
to the Socket.
Store the Socket and all attachments in a location inaccessible to children.
INSTALLATION
1. Plug the GSM Socket into an electrical outlet, and in a moment, it will switch to power from
the electrical main. The 2 indicators <<LINK>> will glow (depending on the strength of the available GSM
signal: green- good or red- weak) and <<POWER>> (green- electric load off, red- electric load on).
2. Install the alarm devices ‘Motion Detector MD 101’ and ‘Door/Window Sensor DWS 102’’.
The ‘Motion Detector MD 101’ should have an unobstructed view of the protected zone. The recommended
height for installation is approximately 2 meters. The distance for detection of human presence in the
protected zone is up to 10 meters. The alarm device ‘Door/Window Sensor DWS 102’’ should be installed
above door and window openings.
