Page 9
SECTION 3 – Deployment
Quick Installation Overview
NOTE - Never loosen any of the bolts, washers, nuts, or caps on the match.
Step 1 – Install your mast or optional tripod away from power lines.
Step 3 – Place the ground wire ring connector over the bottom bolt on the match
Step 4 – Install the mounting plate on your mast.
Step 5 – Push the stake on the ground wire into an earth ground.
Step 6 – Place the NVIS element’s ring connector(s) over the top bolt on the match.
Step 7 – Assemble the vertical element, and install it on the mounting plate.
Step 8 – Attach your coax from your tuner to the SO-239 on the match.