Page 8
Step
Assembly
3
Locate the
large Coaxial Loop element:
Straighten this Alpha Coaxial Loop Element to form an approximate circle that is
slightly larger than 3 feet in diameter. Take note of the approximate center for this run
of coax. This is where the smaller Coaxial Loop element will be attached using the
included fastener.
4
Locate the
smaller Coaxial Loop element:
Attach this coax with the fastener to the top and center of the large Coaxial Loop
element. (Note – When the antenna is Vertical, the smaller Loop will be
located inside the Outer (larger) Loop.
5
Locate the
Mount and Thumb Screw:
Mount the coax as depicted in Figure 3,
and then secure the thumb screw till it is
finger tight.
