Installation
• Remove the top cover and slide the iPhone into the
battery case.
• Install the top cover in the correct orientation and snap
into place on all sides.
• Removing: Pull off the top cover, slide the iPhone out,
then reinstall the top cover.
Note: When the battery case is turned on, you
will notice the charging signal appear on your
phone screen’s battery indicator. When charging
is finished, the signal will disappear. The battery
case includes a USB charging cable. Only use
the provided USB cable to charge and sync your
battery case with a wall charger, or with a
laptop/desktop. Avoid using aftermarket and
non-standard cables as they can cause damage
to the battery case, your iPhone, and/or cause
overheating or fire.
Charging your Battery Case & iPhone
• Connect your batttery case (iPhone already installed) to
the USB power cable.
• Connect the USB power cable to any USB power source
such as computer to start charging. The battery case is
programmed to let your iPhone charge first, then the
battery case will charge.
• Charge until the LED indicators indicate fully charged
(all 4 LEDs are solid)
Charging your Battery Case and
iPhone
• Press and hold the power button for about 3 seconds to
turn on the battery case and start charging your iPhone.
• Press and hold the power button for 3 seconds again to
deactivate the battery case and stop charging. This can
significantly save more battery power to charge the
iPhone next time.
