A S S E M B L
A S S E M B L
Y
Y
1. Front guard
2. Guard securing clip
3. Lock nut (except for
VL 28.2 model)
4. Fan blade
5. Rear guard lock nut
6. Rear guard
7. Stop pin
8. Locating pins
9. Motor shaft
- Remove the lock nuts (3) and (5) from the motor shaft (9) if needed.
- Insert the rear guard (6) on the motor shaft (9) with the help of locating pins (8). Fix with the lock
nut (5).
- Insert the fan blade (4) on the motor shaft (9) till it hurts the stop pin (7). Fix with the lock nut (3) by
turning in anti-clockwise direction. Check that the blade rotate freely by turning with your hand.
- For VL 28.2 model, insert the blade (4) on the motor shaft Check that it can rotate freely.
- Open the securing clip (2) and assemble front and rear guard. Close the clip and tighten the screw.
10. Support
11. Base
12. Nut
13. Power cord
- Insert the power cord (13) in the hole of the base (11) and fix the support (10).
- Insert the power cord (13) in the nut (12) and tigthen this one around the support (10).
9
1
2
3
4
5
6
7
8
9
10
11
12
13
notice_VL28-37-45 20/11/06 12:23 Page 9
