H E P
H E P
A F I L
A F I L
T E R
T E R
- When the filter indicator replacement is light on, the HEPA filter must be replaced. After replacement,
insert a small object (such as a pin) into the hole marked RESET while the unit is on. You will hear 3
beeps, the unit is ready for a new filtering cycle.
Note : if the air quality is very poor you may replace the hepa filter before the hepa indicator is light on.
• Replaced hepa filters
- Switch off the appliance and unplug it.
- Remove the rear cover (5) by pressing the fixing (6).
- Take off the hepa filter and replace it by a new filter.
- Replace the rear cover.
Note : Prefilter must be on the sid of the rear cover.
10
CAUTION:
Never replace a used hepa filter in a reverse direction, otherwise the dust absorbed will be blown out.
The Hepa can not be cleaned, it can only be replaced.
1
2
4
5
3
notice_PI242_reseau 24/11/05 18:06 Page 10
