D E S C R I P T I O N D E L’ A P PA R E I L
D E S C R I P T I O N D E L’ A P PA R E I L
1. Buse orientable de diffusion des micro-gouttelettes
2. Réservoir d’eau
3. Valve
4. Écran LCD
5. Tableau de commandes
6. Cordon d’alimentation (non visible)
7. Transducteur
8. Entrée d’eau (avec bouchon)
9. Poignée de transport
10. Indicateur de réservoir vide
11. Touche « Minuteur »
12. Touche « Mode »
13. Touche « Ioniseur »
14. Touche «humidité - »
15. Touche « humidité + »
16. Touche Marche/Arrêt
17. Indicateur de fonctionnement
18. Cartouche anti-tartre
3
MODE :
• Press mode key (12). Once to select mode I (constant and large mist), twice to select mode II
(constant and middle mist), three times to select mode III (constant and small mist).
TIMER :
• Press timer key (11) to program the appliance for 2 hours, 4 hours, 8 hours or 12 hours.
• If the water tank is empty, waterless light indicator lights on.
C L E A N I N G A N D M A I N T E N A N C E
C L E A N I N G A N D M A I N T E N A N C E
• Clean the transducer with descaling detergent. Take out the water tank from the base, empty the
base and drop 10 ml of descaling detergent on the transducer. (See picture below)
• Wait about 2 to 5 minutes then wash with a brush and rinse plentifully with clear water.
• To clean the water tank, file it half and add soft detergent. Screw the tank cap and shake it up and
down several times, and then use water to rinse.
• If there is waste left in water flume, clean it with a damp cloth and detergent, then rinse with water.
• If the humidifier has not been working for a long time, clean it as described above.
• Cleaning of the descaling cartridge: take out the cartridge and soak it into salt liquid (one big spoon of
salt in a glass of water) for about 60 minutes. Rinse with clear water and replace in the product.
10
1
2
4
5
9
7
8
3
10
11
12
13
14
15
16
17
TRANSDUCER
18
