AR7088H Router User Manual
Tel:+86 592-6195619 Fax:+86 592-6195620
E-mail:
Page 14 of 59
Web:
Add: NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
router with sign “ANT” and “GPS”(some models are two antennas, namely "M-ANT",
"D-ANT").
Screw the SMA female pin of the WIFI antenna to the male SMA interface of the router
with sign “WIFI”.
Warning: The cellular/GPS antenna and the WIFI antenna cannot be connected wrongly.
And the antennas must be screwed tightly, or the signal quality of antenna will be
influenced!
Installation of SIM/UIM card:
SIM/UIM Card Installation
Firstly power off the router, and press the out button of the SIM/UIM card outlet with a
needle object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into
the card sheath (Pay attention to put the side which has metal point outside), and insert
card sheath back to the SIM/UIM card outlet.
Warning:
Forbid to install SIM/UIM card when powered!
Installation of cable:
Network Cable (Standard)
RS232 Cable (optional)
RS485 Cable (optional)
Insert one end of the network cable into the switch interface with sign “WAN” or “LAN”,
and insert the other end into the Ethernet interface of user’s device. The signal connection
of network direct cable is as follows:
RJ45-1
RJ45-2
1
1
2
2
3
3
4
4
5
5