ALORAIR STORM PRO, Руководство пользователя

Страница: 19 / 22

o
o
o
o
Storing Your Dehumidifier
Troubleshooting
If you plan on storing your dehumidfier for an extended period of time:
1. Turn unit off and allow to dry. 4. Clean the filter.
2. Manually drain pump reservoir.
5. Store in clean,dry environment
.
3. Wrap and secure the power cord.
Symptom Cause Solution
Display is Blank
No Airflow
Error Code: E1
Error Code: E4
Error Code: LO
Error Code: HI
E5 Error Code
Poor Connection
Power Outage
Filter is Dirty
Air lnlet or Outlet is Blocked
Humidity Sensor or
Communication Error
Problem with Pump
Room Temperature is below
33.8
Room Temperature is above
110
Refrigerant Leak
Verify that both ends of the
Power cord are plugged in
Reset power
Clean the filter
Clear the blockage
Check to ensure that the sensor
wire is connected at both ends.
if no issues are visible, the
sensor may be faulty.
Verify that the pump is properly
installed and functioning. If so,
unplug the unit for two minutes,
then restart.
Increase the room temperature
so it is within operating range
(above 33.8 ). If error still
displays, check sensor.
Decrease the room temperature
so it is within operating range
(below 110 ). If error still
displays, check the sensor.
Contact Your Installer for
Assistance