alocity F3D100, Руководство пользователя

Страница: 2 / 6

Installation to be performed only by certi
Þ
ed installer
!
Power Sourcing Requirement: PoE+ (802.3at Type 2) 30W
!
Unit to be powered by UL294B certi
Þ
ed IEEE PoE+ 802.3at Type 2 Power Sourcing
Equipment using unshielded cat5e or better cable with a maximum cable length of
330 feet (100 meters)
!
A ULC 60839-11-1 Listed power supply with appropriate grade is required to be
provided for ULC installations
!
Wiegand/OSDP Badge Reader max cable length: 5 ft - 22 AWG (1.5 m)
!
Wiegand Panel max cable length: 500 ft - 22 AWG (152 m), 300 ft - 24 AWG (91 m)
OSDP Panel max cable length: 4000 ft - 24 AWG (1,219 m),
Installation Prerequisite
Connect Directly to an Electric Lock
Fail Safe Lock
There is normally a current
ß
owing through the relay on the Fail Safe lock. When the relay is
activated, the current
ß
own is blocked, and the door lock will open. If the power supply is cut o
"
due to a power failure or an external factor, the door will remain open.
NC -Burgundy/Yellow
COM - Brown/Red
-
!
+
Connect the two NC wires together to the + wire
on the lock.
!
Connect the two COM (Brown/Red) wires to the
+ wire on the power source.
!
Connect the - negative wire from the power
source to the - negative on the lock.
!
Each wire supports up to 1A, connecting
together will allow for up to 2A current to
ß
ow.
F3D100 Pigtail