AS 3200V2 Hardware Manual
6 VOUT Molex 2Pin Connector(J12)
This is a video out Molex 2Pin connector
.
7
Terminal Register 16Pin DIP Switch(SW1, SW2)
This switch is used to choose termination resistor (75
Ω
) in VIN1-8(SW1) and
VIN9-16(SW2). Please set the switch ‘ON’ to set to the termination resistor.
8 VIN 1-16 40Pin Box Connector(J5)
This is a video signal input connector. It is connected to the VIN1-16 connector
of real-time display card when user uses the real-time display card with
AS3200V2. To prevent misconnection, the connector was grooved.
9 WATCHDOG 2Pin Pinheader * 2(J1, J2)
Two watchdog 2pin pinheaders are respectively connected to reset connector of
mother board and reset connector of system case. The pin has no polarity.
10 DIO 20Pin Box Connector(J15)
This connector is used to test DI/DO and connected to extension card. (Please
refer to Extension Card Manual for more details.)
6
www.alnetsystems.com
2004-04-02
