Almost Heaven Saunas TIMBERLINE, Инструкция по сборке, Страница: 12 / 33

Assemble instructions p. 12/33
4. Assembling the cabin
4.1. Mounting the base frame
Lay the base frame on to the foundation as shown in the floor plan and in the
foundation displays (see page 10, 11 and 12). Glue the floor frames together at
the corners and screw the parts using 5 x 90 mm screws.
4.2. Mounting the cabin walls
Start with the assembly of the log planks on the back wall. Proceed row-wise.
As done in case of base frame, screw the corners. Hammer the dowel nails into
the drilled holes in every row. If you are not assembling in a high-wind area it is
not necessary to use the metal dowels.
4.3. Mounting the door
Place the door in the door opening and screw the timbers from the outside to the
door frame. Then mount the outer and inner door frame covers.
4.4. Mounting the window
First place a window frame inside and then screw it in. Install the glass from
outside in and mount the outside window frame. Install the vent covers as shown.
4.5. Mounting the floor and cover strips
Install the floor supports as shown and screw into the outside base frame.
4.6. Assembling the internal roof
Mounting of the roof supporting ledges. Distance to the top edge: 210 mm.
Insert the two roof elements.
ATTENTION!
Note the floor plan on page 10 or 11 and the illustrations from page 15
onwards.
Check the right angle before screwing the wall elements together. Ob-
serve the tip on page 4.
Note the position of the ventilation slides in the 2nd and 14th row.