Almaco SeedBoss, Руководство оператора, Страница: 15 / 25

OPERATION C-3
Changing Screens
The screens can be changed by loosing the four bolts on each side of the screen
and removing the slotted metal screen keeper and Plexiglas shield on each side.
Next remove the three screws on the bottom of the screen and loosen the 3
screws at the top of the screen. The screen is slotted on the top so you can
remove the old screen and insert the new screen without removing the top
screws. Once the new screen is in place you can tighten the screen screws and
replaced the keeper and Plexiglas shield and tighten the screws.
Scalp screen
Adjust Angle of Grader Deck
You can adjust the angle of the grader deck to increase or decrease the
throughput of the grain. Once you have adjusted the angle, you may also need
to adjust the angle of the good seed spout located underneath the machine.
Check the seed tube going to a seed transport venturi and adjust if needed.
Deck
adjustment holes