Allview P5 QUAD, Руководство пользователя

Страница: 20 / 46

20
Open Wi-fi and to connect to the wireless network
Press home>Menu then touch Settings> WLAN symbol
Slide the wi-fi switch to activate Wi-Fi. Phone will automatically scan for available wireless
networks. Then a list of Wi-Fi network will show the founded network name and security settings. (open
network or WEP WPA/WPA2 with password).If you enable the notification in Wi-Fi settings, the status
box will show an icon when open available wireless network found.
Touch one of the Wi-Fi choices to connect the network. When you choose open network, phone will
connect to it automatically. If you choose WEP WPA/WPA2 with password, you should type the
password first, then touch to connect it.
Notices : when the phone is connected to the wireless network, the status
box will show the Wi-Fi icon , and the approximate signal strengthen (the
number of lit bars). If touch the connected network will display the name of
Wi—Fi network, status, speed, signal strength, security and IP address.
If you want to delete the wireless settings, please touch “Forget” as in the
right picture. If you want to connect to this network, you should re-enter these
settings.
Notices: unless you choose not to reserve the network, otherwise, there is
no need to re-enter the corresponding password when next time connecting to
the previously encrypted wireless network. Wi-Fi will search automatically, that
is, phone needn’t to perform additional steps to connect Wi-Fi networks.