5 EN
Precautions for using battery
Improper use of the battery will cause leakage. So please follow the methods below and use carefully.
Please note the batteries' polarity, to avoid short circuit.
When the battery's voltage is insufficient and affects the use range, you should replace it with a new battery.
Remove the batteries from the remote control unit if you do not intend to use it for a long time.
Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
Do not put the battery into fire and charge or decompose the battery.
Please dispose batteries abiding by relevant environmental protection regulation.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
Before Bluetooth searching, please make sure you have activated the pairing mode of the external Bluetooth
devices. For the remote control you can press the
and MENU buttons together to open its pairing mode.
For other Bluetooth devices, please read their own instruction manuals for opening the pairing mode.
BASIC SETTINGS
1.
Connecting the remote with the TV
(optional, valid only for TV models with Bluetooth remote control)
.
For the models that require this step, before searching through Bluetooth, make sure you have activated the
external Bluetooth devices in pairing mode.
In the case of the remote, simultaneously press the “LEFT” and “MENU” buttons to enter into pairing mode
(the remote LED must flash when entering in pairing mode).
Select the name of the remote - TV BLE Remote - and press OK to pair.
For other Bluetooth devices, read their instruction manuals for the pairing.
2. Select menu language.
3. Select if you want or do not want to use an Android device to set up the TV.
Note: If you want to use an Android device to set up the TV, please proceed as indicated on the screen. If you
do not want to use an Android device to set up the TV, continue with the following settings.
4. Select if you want or do not want to connect the TV to a WiFi network.
If you choose to connect the TV to the network, you must select the desired network – insert password – press
OK and the TV is connected to the network.
Select if you want or not to connect to your Google account.
In order to connect to your Google account, select if you want to use “Phone/PC” or through “Using the remote”
– Insert e-mail address and password – OK.
5. Read/scroll down the text to accept the Google Terms and Conditions and the Google Privacy Policy.
6. Choose if you want to allow Google or a third party the permission to use your TV location.
7. Choose if you want to allow Google to implicate you in improving the Android TV app.
About the device features – press the right arrow from the remote to skip this step.
8. Select the country.
9. Set the password – press OK – set desired password, with the exception of “0000”
Note: you can use the numbers from the remote
10. Select usage environment: Home or Shop.
Note: The Home mode is recommended for using at home, whereas the Shop mode is used for shop
demonstrations, because it uses more power.
11. Chromecast: On/Off
12. Tuner mode:
-
Select Antenna if you are using analogic programs or DVBT/T2;
-
Select Cable for CATV signal, given by your provider;
