ALLTO SOLAR AS-SL-S01 Скачать руководство пользователя страница 4

6). OPERATION:

After the initial 1-2 days charge, the solar barn light is ready to use. Press on/off button on the back of the solar panel,

the bulb should illuminate immediately. Everything is set up, you can control the light thru the remote control.

7). Light Mode Setting

Mode-1 Regular ON/OFF

Manually control on or off and adjust the brightness, when press “ON”, the light will remain on all days and nights until

battery is dead; when press “off”, the light will turn off immediately.

Mode-2 Dusk to Dawn +Timing (Light will not be illuminated as long as there is sunlight)

a).

Light will turn on in dusk and turn off in dawn automatically. Make sure the light is on before setting this mode, press

“Auto” button, the light will flash to confirm and then enter to selected mode.

b).

Light will turn on in dusk automatically and turn off after the timing 2-4-6-8 hours. Make sure the light is on before

setting this mode, press “Auto” button, and then press designed timing hours, the light will be flash to confirm the setting

and enter to selected mode.

5.CARE AND MAINTAIN:

Ensure the solar panel remains in a position that optimizes exposure to the sun, especially during the winter months.

The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal performance

and battery charging.

Utilize the same technique to clean the light bulbs of the solar string lights.

Never let any abrasive material come into contact with the solar panel or bulbs.

6.WARRANTY:

Thank you for purchasing the solar battery charger , should you experience any defects due to the manufacture of this

product, we will provide you with extended 12 months warranty. You are entitled to a replacement or refund for a major

failure. If you have any questions, feel free to contact us by email

[email protected]

, we will get back to you

within 12H and MAKE IT RIGHT!!

www.alltosolar.com

ALLTO SOLAR TEAM

Содержание AS-SL-S01

Страница 1: ...ystem Please contact us with the email if you are not comfortable installing the product Prior to using and installing the solar battery charger please read the safety information provided in this user manual Be sure to use the product as outlined in this user manual Altercation or modifications carried out without appropriate authorization may invalidate the user s right to operate the equipment ...

Страница 2: ... charge The solar panel can be mounted onto walls or roofs or simply inset it to ground 2 3 Prior to using your solar pendent light the solar panel needs sunlight for a period of 1 2 days This initial charge should be done without the string lights connected or with the solar panel in the OFF position after 1 2 days your included batteries will be fully charged 3 INSTALL SOLAR PANEL THE SOLAR PANE...

Страница 3: ...racket to flat surface mark the holes positions with pencil on the surface drill hole on the wall 2 Place this bracket on your chosen surface and use the included screws to mount the bracket The canopy base of the light fixture mounts onto this bracket and is secured using the two small included screws Note There is a hole in the canopy base to allow the cable to pass through Ensure the pendent li...

Страница 4: ...urs Make sure the light is on before setting this mode press Auto button and then press designed timing hours the light will be flash to confirm the setting and enter to selected mode 5 CARE AND MAINTAIN Ensure the solar panel remains in a position that optimizes exposure to the sun especially during the winter months The solar panel should be cleaned with a damp cotton cloth on a regular basis Th...

Отзывы: