INITIAL INCLUSION
Install the Shelly to the light socket. Press the switch/button
to which Shelly is connected. The Shelly should turn on. Press
the switch/button again and Shelly will turn off.
You may choose if you want to use Shelly with the Shelly
Cloud mobile application and Shelly Cloud service. You can
also familiarize yourself with the instructions for Manage-
ment and Control through the embedded Web interface.
CONTROL YOUR HOME WITH YOUR VOICE
All Shelly devices are compatible with Amazon Echo and
Google Home. Please see our step-by-step guide on:
https://shelly.cloud/compatibility
SHELLY APPLICATION
Shelly Cloud gives you opportunity to control and adjust all
Shelly® Devices from anywhere in the world. You only need
an internet connection and our mobile application, installed
on your smartphone or tablet.
Registration
The first time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly® devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then re-
ceive instructions to change your password.
⚠
WARNING!
Be careful when you type your e-mail address
during the registration, as it will be used in case you forget
your password.
First steps
After registering, create your first room (or rooms), where you
are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for auto-
matic turning on or off of the Devices at predefined hours or
based on other parameters like temperature, humidity, light
etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mo-
bile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, connect it to the power grid.
Step 1
Install your Shelly into the light socket and turn the light on.
⚠
WARNING!
In case the Device has not created its own Wi-Fi
network with SSID like
ShellyBulbDuo-35FA58
for the white
model or
shellycolorbulb-35FA58
for the colored version
check if you have power connected to Shelly. If you do not see
an active WiFi network with SSID like
ShellyBulbDuo-35FA58
or
shellycolorbulb-35FA58
, reset the Device. If the Device
has been powered on, you have to power it off and on again 5
consecutive times*. Or if you have a switch/button connected
to the Device, press it 5 consecutive times*. When the light
starts to flash Shelly should return to AP Mode. For Shelly duo
RGBW – light will start to flash in red, next time you switched
of and on it will light in blue - this mean that the bulb is in AP
more, If not, please repeat or contact our customer support at
*Upon each OFF state, please wait 2-3 seconds.
Step 2
Choose “Add Device”. In order to add more Devices later, use
the app menu at the top right corner of the main screen and
click “Add Device”. Type the name (SSID) and password for
the WiFi network, to which you want to add the Device.
Step 3
If using iOS:
you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open
Settings > WiFi and connect to the WiFi network created by
Shelly, e.g.
shelly1-35FA58
.
If using Android
your phone/tablet will automatically scan
and include all new Shelly Devices in the WiFi network that
you are connected to.
Upon successful Device Inclusion to the WiFi network you will
see the following pop-up:
Step 4
Approximately 30 seconds after discovery of any new Devic-
es оn the local WiFi network, а list will be displayed by default
in the “Discovered Devices” room.
Step 5
Enter Discovered Devices and choose the Device you want to
include in your account.
Step 6
Enter a name for the Device (in the Device Name field).
Choose a Room, in which the Device has to be positioned.
You can choose an icon or add a picture to make it easier to
recognize. Press “Save Device”.
Step 7
To enable connection to the Shelly Cloud service for remote
control and monitoring of the Device, press “YES” on the fol-
lowing pop-up.
Shelly devices settings
After your Shelly device is included in the app, you can con-
trol it, change its settings and automate the way it works. To
switch the Device on and off, use the Power button. To enter
at the details menu of the Device, click on it’s name. From the
details menu you may control the Device, as well as edit its
appearance and settings.
You can set Shelly Duo RGBW to work on two ways:
• Color mode
– on this mode you can select a color at your
choice. As well you can turn it off and select the intensity of
the light. In color mode you can chose also different light
effects:
- Off- effects will be off
- Meteor Shower
- Gradual change
- Flash
